Search Results (1 - 1 of 1 Results)

Sort By  
Sort Dir
Results per page  

Mustafa, MansoorInvestigation into Offset Streams for Jet Noise Reduction
Master of Science, The Ohio State University, 2015, Aero/Astro Engineering
This effort investigates the near field behavior of two ideally-expanded subsonic dual-stream jets. One case implements a traditional symmetric, concentric dual-stream nozzle configuration while the other imposes an asymmetric, eccentric layout to model the behavior of an offset stream. The essence of an offset stream is to force an uneven azimuthal distribution of the secondary coflow and create an outside stream that varies in thickness. Past studies have shown a benefit in acoustic propagation in the direction of the thickest coflow and the present work further analyzes this phenomenon. A LES (Large Eddy Simulation) approach is implemented to run the simulations for both cases and a number of qualitative and quantitative analyses tools are used for post-processing. A reduction in the noise levels for the lower, thicker side of the eccentric nozzle is observed in comparison to the baseline concentric case. Examination of the mean flow behavior shows a shorter, thinner primary potential core for the offset case and a faster axial velocity decay rate. The asymmetric distribution of the coflow causes varying velocity profiles in the radial direction for the top and bottom regions and consequently produces unique flow features on either side. Lower levels of shear stress and slower decay rates lead to less turbulence production on the lower side of the eccentric nozzle. An investigation into the flow structures reveals lower vorticity and weaker convective structures on the bottom which influences propagation in that direction. Two-point correlation analysis reveals the presence of smaller turbulence scales in the lower, thicker portion of the eccentric case. This is further confirmed by an Empirical Mode Decomposition (EMD) study that shows lower frequency ranges dominate the concentric near field in comparison to the eccentric. The combination of these unique features demonstrate the principles behind the acoustic benefit of implementing offset stream flows in dual-stream nozzle configurations.


Datta Gaitonde (Advisor); Mei Zhuang (Committee Member)


Aerospace Engineering


offset; noise reduction; jets; aerospace; aerodynamics; LES; computational simulation; jet noise; eccentric; concentric; dual-stream; nozzle